Contact Us

Use the form on the right to contact us.

You can edit the text in this area, and change where the contact form on the right submits to, by entering edit mode using the modes on the bottom right. 

2 Cazenove Road
London , N16 6BD

020 7275 8660

London's only all BMX shop

Forks

Fit bike co Blade 2 fork

Fit-blade-3.jpg
Fit-blade-3.jpg
sale

Fit bike co Blade 2 fork

99.95 129.95

New updated Blade forks from Fit. 

Third version of the popular Blade fork. Fits goal was to design and produce an extremely strong fork with plenty of tire clearance. After 2 years of R&D and a lot of investment in tooling, the Blade V.3 is available with a traditional 33mm offset. Here are a few features that make these forks so strong.

  • Using left and right specific investment cast drop-outs instead of traditional Cr-Mo plate, we’ve eliminated the weld gap on the inside of the drops, and were able to thicken up the drops toward the top making a much stronger drop-out/leg connection.
  • Seamless, swaged legs provide more strength than welded or fused caps-especially if pegs are installed. The ends of these legs are formed, not capped and welded so there is nothing to fracture.
  • A longer 166mm CNC’d steerer tube with increased wall thicknesses wherever possible and a 24mm x 1.5 compression cap with integrated race.     Tapered and butted legs provide tons of strength, crown weld surface, and peg clearance.
  • Post weld 4Q Baked heat-treatment.


Specs:

Steerer Length: 166mm

Offset: 33mm

Top Cap: H24 / 6mm Allen Key

Weight: 1020g / 2.25lbs

Add To Cart